Home
Tutorials
SOLIDWORKS
Mastercam
Fusion 360
CorelDraw
Animate CC
Drafting

Mastercam 9 Tutorials

Welcome to our Mastercam Tutorials. The following tutorials with the PDF icon are available for download. Download the free reader from Adobe.

Any questions contact us at

   

Table of Contents
CAD 1. Truck. Simplified- use grid to measure.
CAD 2. Speed Boat. Simplified- use grid to measure.
CAD 3. Airplane. Simplified- use grid to measure.
CAD 4. Electric Circuit. Simplified- use grid to measure.
CAD 5. Motor Mount Pattern. Use as a pattern for sheetmetal motor mounts in Sumo cars and Motor boats.
CAD 6. 5 Point Star. Easy, fun and fast. Great for beginner. Use to practice trimming.
CAD 7. 12 Point Star. Another good one for beginners.
CAD 8. Step Block. Introduction to 3d extruding and surfacing.
Solids 9. Channel Block. More 3d with holes.
CAD 10. Wire Frame Model. Introduction to 3D modeling with rotating.
CAD 11. Torus. 3d.
Solids 12. Motor Mount. Draw side view geometry and extrude.
Solids 13. Propeller. Air prop for airplanes and mag-lev vechicle.
CNC 14. Box Letters. Simple letters and hole in 3 by 1.5 stock for key chain.
CNC 15. Letter Toolpaths. Toolpaths for contour of letters and contour hole.
CAD 16. Piper. 2d design for foam plane. And it flies! Use Kelvin´s power pole to fly.
CAD 17. P-51 Mustang 2D.
Solids 18. Piper Solid. Design for foam plane. Complete with airfoil from foam food tray, landing gear and propeller.
Solids 19. B-1 Glider. Solids
CAD 20. Power Train for Boat.
CAD 21. Motor Boat.
CAD 22. Catamaran.
CAD 23. Hydroplane.
Solids 24. Boat Solid. 3D.
Solids 24b. Boat Solid Part 2. Add all the parts to your solid hull chapter.
CNC 25. Block for Boat.
CNC 26. Boat V Bottom surfaces. Start with Block for Boat.
CNC 27. Boat Round Bottom surfaces. Start with Block for Boat.
CNC   28. Boat Toolpath 1.
Solids 29. Mag-Lev Vehicle.
CAD 30. Sumo Car 2d.
Solids 31. Sumo Car 3d. Advanced 3d with Viewports.

Changes To Mill9.cfg File

To access the config file click: Main Menu, Screen, Configure.
1.  Set Grid Size.  Click the Screen Tab and Selection Grid Button.  In the Grid Selection Parameters dialog box click to select Active Grid and Visible Grid.  Set Spacing to .2 for X and X.
2.  Set Group Colors.  Click Setting Tab and Group Colors Button.  In the Group Colors dialog box click Use Edtity colors.