Chair Tutorials

Welcome to cudacountry's SOLIDWORKS 2018 Adirondack Chair Tutorials. We use SOLIDWORKS Weldments to design our chair. The following tutorials with the PDF icon are available for download. Download the free reader from Adobe. Any questions contact us at

Tutorials use Weldments to create chair.


Table of Contents

Part 1. Profiles.

2. Bottom Rail. Use Mass Properties to check your work. Mass 1.47 pounds.

Part 3. Side Rail. Mass 5.03
Part 4. Back Leg. Mass 6.83
Part 5. Front Leg. Mass 9.05
Part 6. Arm. Mass 12.2
Part 7. Top Rail. Mass 14.26
Part 8. Arm Support. Mass 14.46
Part 9. Back Slats. Uses cool Split Line to trim arcs on Slats. Now with Hold Wizard. Mass 33.57
Part 10. Seat Slats. Mass 39.3
Part 11. Plug.
Toolbox 12. Toolbox Screws. Create custom flat head wood screws parts 1.5 and 2 inch using Toolbox.
13. Set Toolbox Files Properties. Use sldsetdocprop.exe to change the Screw toolbox files from a Toolbox file to a SOLIDWORKS part file.
Assembly 14. Assembly Screws and Plugs with SmartMates.
Drawing 15. Drawing with cut list.
Here are 2012 tutorials.
Scale Chair .098 and print card holder.